人間が寝ていても午前 3 時過ぎとか 5:30 AM とかにこれをやるのでたまらない。

部品を入替えたりして結局、 ATI Radeon RX1550 128M (右の写真) がこわれたらしいと判る。 これは 後から追加したもので、 僕の日記に 2008/01/28/ に使い始めた、 と書いてある。 冷却扇を手で回すと、軽くは回らないので、どうも 埃が入って、回りが悪くなり、温度が上って、こわれたらしい。
玄人志向の RX1550-LE128H を見ると、扇の形が少し違うが、誤差の範囲かな。

i386/4.99.70

入手後すぐに NetBSD/amd64 4.99.70 を入れた
network (bge0) と Disk が見えなかった(ので修正して入れて見た)

amd64/5.0_BETA (200901130000Z)

• network は見えるようになっていた
• sysinst で disk も見えた
• しかし GENERIC で起動したら disk が見えないので kernel に

  PCI_ADDR_FIXUP
  PCI_BUS_FIXUP
  

  の二行を追加したものを用意して動かす

i386/5.0_BETA (200901220000Z)

pckbc: cmd word write error

という字が見える

viaide1 port0: device present, speed: 1.5Gb/s

stops after above line is shown.
という行を表示した後、先に進まない

i386/5.0_BETA (200901220000Z) 修正版

本来は (-current では) pxeboot でも /boot.cfg を転送したり pxeboot の入力待で、次のようなことを入力すれば MD kernel は作らなくてもいいと教えて貰ったけれど、

load tftp:miniroot.kmod
boot tftp:netbsd-GENERIC

一応、(以前と同じ方法で) 次の二行が入った GENERIC と GENERIC_MD を作って

PCI_ADDR_FIXUP
PCI_BUS_FIXUP

それを使って sysinst
無事動く

NetBSD t-105 5.0_BETA NetBSD 5.0_BETA (GENERIC_T105) #0: 
Sat Jan 24 22:59:05 JST 2009  
root@modena:/fport/src/sys/arch/i386/compile/obj/GENERIC_T105 i386

これが入っている kernel を初めから用意してくれていると助かるのになぁ

で本題だけれど、最近の NetBSD では atactl を使って、 動作中のものの製造番号 (Serial) を調べることが出来る。 こんな具合にだ。

pts/0:makoto@t-105 1:05:47/090122(...gcc/work)>  \
sudo atactl /dev/wd0 identify | grep -i 'serial #'
Model: WDC WD800AAJS-18TDA1, Rev: 01.00A0, Serial #:      WD-WMAM9CPP455

Model: FB080C4080, Rev:     HPF0, Serial #: 5RW20BRJ
Model: FB080C4080, Rev:     HPF0, Serial #: 5RW2K07S
Model: FB080C4080, Rev:     HPF, Serial #: 5RW2K065
Model: FB080C4080, Rev:     HPF0, Serial #: 9RW0EBMP

On February 17, 2009 all full-power broadcast television stations in the United States will stop broadcasting on analog airwaves and begin broadcasting only in digital.

 361  12:35   ../gcc-4.2.4/configure --enable-languages=c --host=amd64--netbsd

/export/local-src/gcc-4.2.4-work-amd64-enable-c-fail/./prev-gcc/xgcc
-B/export/local-src/gcc-4.2.4-work-amd64-enable-c-fail/./prev-gcc/
-B/usr/local/amd64--netbsd/bin/ -c -DHAVE_CONFIG_H -g -O2
-I. -I../../gcc-4.2.4/libiberty/../include -W -Wall -pedantic
-Wwrite-strings -Wstrict-prototypes -Wc++-compat
../../gcc-4.2.4/libiberty/mempcpy.c -o mempcpy.o
../../gcc-4.2.4/libiberty/mempcpy.c:35: 
	error: expected declaration specifiers or '...' before 'size_t'
../../gcc-4.2.4/libiberty/mempcpy.c:35: 
	warning: conflicting types for built-in function 'memcpy'
../../gcc-4.2.4/libiberty/mempcpy.c:38: 
	error: expected declaration specifiers or '...' before 'size_t'
../../gcc-4.2.4/libiberty/mempcpy.c:39: 
	warning: conflicting types for built-in function 'mempcpy'
../../gcc-4.2.4/libiberty/mempcpy.c: In function 'mempcpy':
../../gcc-4.2.4/libiberty/mempcpy.c:40: error: 'len' undeclared (first use in this function)
../../gcc-4.2.4/libiberty/mempcpy.c:40: 
	error: (Each undeclared identifier is reported only once
../../gcc-4.2.4/libiberty/mempcpy.c:40: error: for each function it appears in.)
../../gcc-4.2.4/libiberty/mempcpy.c:40: error: too many arguments to function 'memcpy'

gmake[3]: *** [mempcpy.o] Error 1
gmake[3]: Leaving directory `/export/local-src/gcc-4.2.4-work-amd64-enable-c-fail/libiberty'

--- gcc-4.2.4/include/ansidecl.h-orig	2005-07-04 00:38:39.000000000 +0900
+++ gcc-4.2.4/include/ansidecl.h	2009-01-19 14:23:58.000000000 +0900
@@ -368,4 +368,7 @@
 #define __extension__
 #endif
 
+#if defined(__x86_64__)
+typedef unsigned long size_t;
+#endif
 #endif	/* ansidecl.h	*/

The main program of SCIM is named scim. The usage of scim is:

  scim [option]...

  The options are: 
    -l, --list            List all of available modules.
    -f, --frontend name   Uses specified FrontEnd module.
    -c, --config name     Uses specified Config module.
    -e, --engines name    Load specified set of input method engines.
    -ne,--no-engines name Do not load those set of engines.
    -d, --daemon          Run scim as a daemon.
    --no-socket           Do not try to start a SCIM SocketFrontEnd daemon.
    -h, --help            Show this help message.

   140  10:12   scim -f socket -c simple -ne socket -d -e anthy

＠ inputmethod/uim:

/usr/pkg/libexec/uim-helper-server (uim-helper-serve)

uim-1.5.4           Multilingual input method library

The responce to netbsd-bugs should be sent to gnats-bugs at netbsd.org. David Holland kindly transfered it, and it is now linked to the original -> KERN/38265

scim_chartraits.cpp:44: error: no member function 'assign' declared in 'std::char_traits<unsigned int>'
scim_chartraits.cpp:44: error: invalid function declaration

1. obache さんに何とかしてと頼む -> 僕も何とかしたいんだけれどと言われてしまうかな
2. 自分で FreeBSD か Linux を見て回避手段を施して make
3. あきらめて gcc-3 を使って make

• lang/gcc3 で make package
• inputmethod/scim で

  sudo env PATH=/usr/pkg/gcc3/bin:${PATH} make package
  

gcc34-3.4.6nb1      This is the gcc 3.4 compiler

For safety, it is useful to configure GCC with `--enable-checking'. Although this results in a significant performance penalty (since all tree types are checked at run-time), and is therefore inappropriate in a release version, it is extremely helpful during the development process.

   138  11:09   cd /export/local-src/
   140  11:09   mkdir gcc-4.2.1-i386-enable-checking
   141  11:09   cd gcc-4.2.1-i386-enable-checking
   142  11:10   ../gcc-4.2.1-dont-modify/configure --host=i386--netbsd --enable-languages=c
   143  11:10   gmake

../../gcc-4.2.1-dont-modify/gcc/libgcc2.c:673: warning: alignment of '__clz_tab' is greater than maximum object file alignment. Using 16
../../gcc-4.2.1-dont-modify/gcc/libgcc2.c:673: warning: alignment of '__clz_tab' is greater than maximum object file alignment. Using 16
/var/tmp//ccXhI8ct.s: Assembler messages:
/var/tmp//ccXhI8ct.s:377: Error: alignment not a power of 2
gmake[4]: *** [libgcc/./_clz.o] Error 1
gmake[4]: Leaving directory `/export/local-src/gcc-4.2.1-i386-enable-checking/gcc'
gmake[3]: *** [libgcc.a] Error 2

/export/local-src/gcc-4.2.4-enable-checking/./gcc/xgcc -B/export/local-src/gcc-4.2.4-enable-checking/./gcc/ -B/usr/local/i386--netbsd/bin/ -B/usr/local/i386--netbsd/lib/ -isystem /usr/local/i386--netbsd/include -isystem /usr/local/i386--netbsd/sys-include -O2 -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -g -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -I. -I. -I../../gcc-4.2.4/gcc -I../../gcc-4.2.4/gcc/. -I../../gcc-4.2.4/gcc/../include -I./../intl -I../../gcc-4.2.4/gcc/../libcpp/include -I../../gcc-4.2.4/gcc/../libdecnumber -I../libdecnumber -DL_clz -c ../../gcc-4.2.4/gcc/libgcc2.c -o libgcc/./_clz.o
../../gcc-4.2.4/gcc/libgcc2.c:673: warning: alignment of '__clz_tab' is greater than maximum object file alignment. Using 16
../../gcc-4.2.4/gcc/libgcc2.c:673: warning: alignment of '__clz_tab' is greater than maximum object file alignment. Using 16
/var/tmp//ccnOUlHg.s: Assembler messages:
/var/tmp//ccnOUlHg.s:377: Error: alignment not a power of 2
gmake[4]: *** [libgcc/./_clz.o] Error 1
gmake[4]: Leaving directory `/export/local-src/gcc-4.2.4-enable-checking/gcc'
gmake[3]: *** [libgcc.a] Error 2

375          .stabs  "DWunion:t236=237=u8s:235,0,64;ll:223,0,64;;",128,0,423,0
376  .globl ___clz_tab
377          .align 5,0x90
378          .type   ___clz_tab, @object
379          .size   ___clz_tab, 256
380  ___clz_tab:
381          .byte   0
382          .byte   1
383          .byte   2
384          .byte   2

The first expression (which must be absolute) is the alignment required, as described below.
....
The way the required alignment is specified varies from system to system. For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or32, s390, sparc, tic4x, tic80 and xtensa, the first expression is the alignment request in bytes.

gcc (GCC) 4.1.2 20061021 prerelease (NetBSD nb3 20061125)
output as align 32 (but this is without --enable-checking)b

 10  .globl __clz_tab
 11          .section        .rodata
l 12          .align 32
 13          .type   __clz_tab, @object
 14          .size   __clz_tab, 256

--- gcc-4.2.4/gcc/config/i386/bsd.h~	2007-09-02 00:28:30.000000000 +0900
+++ gcc-4.2.4/gcc/config/i386/bsd.h	2009-01-06 12:51:08.000000000 +0900
@@ -70,7 +70,7 @@
    to a multiple of 2**LOG bytes.  */
 
 #define ASM_OUTPUT_ALIGN(FILE,LOG)	\
-  if ((LOG)!=0) fprintf ((FILE), "\t.align %d\n", (LOG))
+  if ((LOG)!=0) fprintf ((FILE), "\t.align %d\n", 1<<(LOG))
 
 /* This is how to store into the string BUF
    the symbol_ref name of an internal numbered label where
--- gcc-4.2.4/gcc/config/i386/netbsd.h~	2004-07-18 06:09:14.000000000 +0900
+++ gcc-4.2.4/gcc/config/i386/netbsd.h	2009-01-06 12:55:50.000000000 +0900
@@ -41,7 +41,7 @@
    segment.  */
 #undef ASM_OUTPUT_ALIGN
 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
-  if ((LOG)!=0) fprintf ((FILE), "\t.align %d,0x90\n", (LOG))
+  if ((LOG)!=0) fprintf ((FILE), "\t.align %d,0x90\n", 1<<(LOG))
 
 /* Profiling routines, partially copied from i386/osfrose.h.  */
 

checking for i386--netbsd-gcc... /export/local-src/gcc-4.2.4-enable-checking/./prev-gcc/xgcc -B/export/local-src/gcc-4.2.4-enable-checking/./prev-gcc/ -B/usr/local/i386--netbsd/bin/
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.

/usr/bin/ld: warning: type and size of dynamic symbol `_fini' are not defined
/usr/bin/ld: warning: cannot find entry symbol start; defaulting to 08048334
/usr/lib/crt0.o: In function `___start':
: undefined reference to `main'
/export/local-src/gcc-4.2.4-enable-checking/./prev-gcc/libgcc.a(__main.o): In function `__do_global_ctors':
/export/local-src/gcc-4.2.4-enable-checking/gcc/../../gcc-4.2.4/gcc/libgcc2.c:2146: undefined reference to `_atexit'

20:11 小手指
20:45 池袋
20:58 東京
21:43 千葉
22:01 本千葉