ずうっと昔の日記 (2003/11/13)
を見て、(あまり良く考えずに)
imget --source:local=../makoto
のようにしたら +inbox に入ってしまった。ので、次のようにして procmail に入直し
imget --source:local=../makoto
pushd ~/Mail/inbox
foreach i (`seq 72406 72420`)
sudo cat $i | \
/usr/sbin/sendmail -f \
`grep Return-Path $i | sort -u | sed -e 's/Return-Path: <//' -e 's/>//'` \
makoto at ki nu;
sleep 3
end
本当に雲の切れた一瞬
雲が光を遮ってくれて
肉眼でも見える(千葉市)
2009/07/22 11:39:50
夕方浜木綿が咲いた。そう言えば僕も数日前の暑い日にミンミンゼミ
が鳴くのを今年初めて聞いた。
Set date and time in Open Firmware
decimal dev rtc sec min hour day month year set-time
So to set the clock to 10 seconds past 11:15PM on December 31st, 2005, the command would be:
decimal dev rtc 10 15 23 31 12 2005 set-time
0 > dev /bandit/ohare/via-cuda/rtc ok
0 > . . . . . . decimal get-time 1907 6 5 1 8 58 ok
Sun Jan 2 10:02:48 JST 2000
0 > dev /bandit/gc/via-cuda/rtc ok
0 > . . . . . . get-time -559038737 6 23 10 57 31 ok
0 > . . . . . . get-time -559038737 6 23 10 57 31 ok
0 > decimal 31 57 10 23 6 0 set-time ok
0 > . . . . . . get-time 1991 6 23 10 58 56 ok
0 >
(全く対応関係が分らない)
- rtc PATH is not fixed machine by machine (but may always be under via-cuda/rtc)
- to get time current setting, use . . . . . . get-time
(do twice to get real number)
- have delay to be effective (see above)
- offset 0 0 0 2 2 1813
0 0 0 21 29 101 1936 3 13 18 48 53
0 0 0 21 28 101 1930 12 20 0 44 58
0 > decimal 0 1 2 3 4 5 6 set-time 2021 10 17 8 30 45 ok
0 > decimal 0 1 2 3 4 5 7 set-time 2022 10 17 8 30 45 ok
0 > 0 1 2 3 4 6 6 set-time 1912 2 5 4 12 33 ok
作り直そうとすると、「gtk+ の版が分らない」とか言う。
どうも
/usr/X11R6 -> /usr/X11
の接続 (symlink) が必要そうな雰囲気。多分どこかで間違えたとは思うが。
その上で make package し直したら、動いた。何だか文字が大きい気がする。
font が足りないのかな。
2005/05/04 の日記 (所謂 install 大会)
semi
emacs-w3m
mu-cite
elscreen (自分の日記)
ElScreen (FTP)
| apel | 10.6 |
|
| flim | 14.8 |
|
| semi | 14.6 |
|
| emacs-w3m | 1.4.4 |
|
| wanderlust | cvs |
|
| riece | cvs | texinfo が出来ない(?) ので make -i で通過 |
| auc-tex | cvs |
|
| tcode | 2.3.1 | + patch + symbol.rev |
| mu-cite | 200507060209 |
|
| x-face | x-face-e21.el |
|
| elscreen | 1.4.3 |
|
| elscreen-gf | 1.5.1 |
|
ttyp0:makoto@mini 8:48:18/060722(...local-src/riece)> autoreconf -f -i
Can't exec "aclocal": No such file or directory at /usr/pkg/bin/autoreconf line 181.
Use of uninitialized value in pattern match (m//) at /usr/pkg/bin/autoreconf line 181.
Can't exec "automake": No such file or directory at /usr/pkg/bin/autoreconf line 182.
Use of uninitialized value in pattern match (m//) at /usr/pkg/bin/autoreconf line 182.
Can't exec "aclocal": No such file or directory at /usr/pkg/share/autoconf/Autom4te/FileUtils.pm line 290.
autoreconf: failed to run aclocal: No such file or directory
./riece-ja.texi:747: 知らないコマンド `$G$-$'.
makeinfo: エラーにより、出力ファイル `./riece-ja.info' を削除します。
-- 残したい場合には `--force' オプションを使ってください。
*** Error code 1
181 8:06 mkdir local-src
183 8:33 setenv CVS_RSH ssh
198 8:46 setenv DISTFILES /e/u/j/distfiles/
＠
semi:
184 8:33 cd local-src/
186 8:40 tar zxf $DISTFILES/apel-10.6.tar.gz
187 8:41 tar zxf $DISTFILES/flim-1.14.8.tar.gz
188 8:41 tar zxf $DISTFILES/semi-1.14.6.tar.gz
189 8:42 cvs -d :pserver:anonymous@cvs.m17n.org:/cvs/root checkout wanderlust
190 8:42 cd apel-10.6/
192 8:43 sudo make EMACS=/usr/local/bin/emacs install
193 8:44 cd ../flim-1.14.8/
192 8:43 sudo make EMACS=/usr/local/bin/emacs install
195 8:44 cd ../semi-1.14.6/
192 8:43 sudo make EMACS=/usr/local/bin/emacs install
197 8:44 cd ..
＠
emacs-w3m:
199 8:46 tar zxf $DISTFILES/emacs-w3m-1.4.4.tar.gz
200 8:46 cd emacs-w3m-1.4.4/
201 8:46 ./configure --with-emacs=/usr/local/bin/emacs
202 8:47 sudo make install
203 8:47 sudo make install-icons
＠
wanderlust:
204 8:47 cd ../wanderlust/
205 8:47 sudo make EMACS=/usr/local/bin/emacs install
＠
riece:
206 8:47 cd ..
207 8:48 cvs -d :pserver:anonymous@cvs.m17n.org:/cvs/root login
208 8:48 cvs -d :pserver:anonymous@cvs.m17n.org:/cvs/root checkout riece
209 8:48 cd riece/
211 8:49 less INSTALL-CVS
210 8:48 autoreconf -f -i
(automake was not installed
214 8:51 pkg_info | grep automake
215 8:52 pushd $PKGSRC/packages/powerpc/All
216 8:52 sudo pkg_add automake-1.9.6.tgz
217 8:52 popd
218 8:52 autoreconf -f -i
219 8:52 ./configure --with-emacs=/usr/local/bin/emacs
221 8:53 setenv LANG C
222 8:53 sudo make -i install
156 9:00 env LANG=ja_JP.eucJP make
157 9:00 env LANG=ja_JP.eucJP make -i
158 9:00 env LANG=ja_JP.eucJP sudo make -i install
＠
auc-tex:
(You need TeX/LaTeX or pLaTeX to install auc-tex)
225 9:01 cvs -d :ext:anoncvs@savannah.gnu.org:/cvsroot/auctex co auctex
226 9:09 cvs -z3 -d:pserver:anonymous@cvs.savannah.gnu.org:/sources/auctex co auctex
227 9:09 cd auctex/
228 9:09 ./autogen.sh
229 9:09 ./configure
230 9:10 ./configure --with-emacs=/usr/local/bin/emacs
231 9:10 make
232 9:10 sudo make install
＠
t-code:
236 9:12 tar zxf $DISTFILES/tc-2.3.1.tar.gz
237 9:12 cd tc-2.3.1/
238 9:12 patch -s -p1 < ~/Mail/ml/tcode/1545
239 9:12 patch -s -p1 < ~/Mail/ml/tcode/1528
242 9:12 cd etc
244 9:13 mv bushu.rev bushu.rev-orig
245 9:13 cat bushu.rev-orig symbol.rev | sort > bushu.rev
246 9:13 cd ..
249 9:14 ./configure --with-emacs=/usr/local/bin/emacs
250 9:14 sudo make install
＠
mu-cite:
253 9:17 tar zxf $DISTFILES/mu-cite-200507060209.tar.gz
276 9:22 cd mu-cite-200507060209/
277 9:22 sudo make EMACS=/usr/local/bin/emacs install
＠
x-face:
284 9:30 sudo mkdir /usr/local/share/emacs/site-lisp/a-files
286 9:30 cd /export/local-src/
287 9:30 cp $DISTFILES/x-face-e21.el.gz .
289 9:30 gunzip x-face-e21.el.gz
293 9:31 /usr/local/bin/emacs -batch -f batch-byte-compile x-face-e21.el
294 9:31 sudo cp x-face-e21.el* /usr/local/share/emacs/site-lisp/a-files/
Symbol's value as variable is void: image-type-regexps
＠
elscreen + elscreen-gf:
まず elscreen を入れる
121 11:02 tar zxf $DISTFILES/elscreen-1.4.3.tar.gz
124 11:02 cd elscreen-1.4.3/
125 11:02 emacs -batch -f batch-byte-compile elscreen.el
126 11:02 /usr/local/bin/emacs -batch -f batch-byte-compile elscreen.el
134 11:05 sudo cp -p * /usr/local/share/emacs/site-lisp/elscreen
138 11:06 ( cd /usr/local/share/emacs/site-lisp/elscreen ; \
sudo mv README README-elscreen )
その後で elscreen-gf を入れる(この順は重要)。
cd ..
122 11:02 tar zxf $DISTFILES/elscreen-gf-1.5.1.tar.gz
135 11:05 cd elscreen-gf-1.5.1/
140 11:07 /usr/local/bin/emacs -batch -f batch-byte-compile read-directory-name.el
141 11:07 /usr/local/bin/emacs -batch -f batch-byte-compile elscreen-gf.el
143 11:07 sudo cp -p * /usr/local/share/emacs/site-lisp/elscreen
＠
wanderlust を起動:
--- Wanderlust NEWS --- press 'a' to show all NEWS
press 'm' to mail this NEWS to your folder
press 'q' to quit
press 'Q' to force quit
--------------
* 2.14.x から 2.16.0 への変更点
** namazu フォルダは機能を拡張した search フォルダに置き換えられました。
namazu 以外の外部プログラムを使った検索が出来るようになりました。デ
フォルトでは、grep での検索がサポートされています。
--------------
* Changes in 2.16.0 from 2.14.x
** A folder type `namazu' is abolished. New folder type `search' is added instead.
＠
机上機入替:
Mac mini の開腹手術をして 80G disk を 80G disk と交換。
起動方法は次の通り。
| boot-device | hd:,ofwboot.elf |
| boot-file | hd:3/netbsd |
/etc/fstab の sd を wd に直しておかなかったので、ちょっとだけびっくり。
mount /
ed /etc/fstab
/sd
s/sd/wd
/
s/sd/wd
w
q
等のようにして直す
# pppoectl -d pppoe0
pppoe0: state = session
Session ID: 0x3a19
PADI retries: 0
PADR retries: 0
Following seems to fix the problem
# ifconfig pppoe0 down
# ifconfig pppoe0 up
The reason why ld is not installed with simple 'make install':
＠
It looks like intention ??:
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install: install-info
＠
anyway by changing Makefile.am:
install: install-recursive
and then
aclocal
automake
will generate Makefile.in for installing ld to the DESTDIR now.
必要 ? Open Firmware, 2.0f1 の場合:
0 > setenv real-base F00000 ok
0 > boot scsi/sd@0:0
>> NetBSD/macppc OpenFirmware Boot, Revision 1.5
>> (root@serv, Sun Jun 1 04:19:09 UTC 2003)
4126788/
