|
- Dynabook R73/T fails to run kernel 10.99.4
8.99.51
was OK
- netboot setup to test R73/T problem (above)
(but seems failing, the same set up is OK for Let's Note CF-SX3, but no good
for this note PC,
saying
NBP file downloaded successfully
but nothing good happens after that
- Kinesis keyboard restoration
- wiring diagram:
-
- ssh to chrooted environment
- setup nvmm
- setup multiple nvmm
- sleep any times by lid close
- Booting 10.0 on N3150 board
- (prepare the info) chroot/pbulk environment for pkgsrc
- enable raid1 with sysinst
(how to install netbsd on raid1 using raidframe)
Once (2016) it could be done,
(some manual operation was necessary, but just do it) ->
installboot
but recent sysinst will not install correctly, (for example 9.3)
- Wanderlust
- double cache, threading and no threading
- namazu interface
＠
raid setup by sysinst:
(how to install netbsd on raid1 using raidframe)
- do as described on 2016 advent calendar
- (say, manual installboot for -t raid)
# installboot -fv -o console=com0,speed=115200 -t raid /dev/wd0a bootxx_ffsv2 /boot
File system: /dev/rwd0a
File system type: raid (blocksize 16384, needswap 0)
Primary bootstrap: bootxx_ffsv2
Secondary bootstrap: /boot
Boot options: timeout 5, flags 0, speed 115200, ioaddr 0, console com0
# installboot -fv -o console=com0,speed=115200 -t raid /dev/wd1a bootxx_ffsv2 /boot
File system: /dev/rwd1a
File system type: raid (blocksize 16384, needswap 0)
Primary bootstrap: bootxx_ffsv2
Secondary bootstrap: /boot
Boot options: timeout 5, flags 0, speed 115200, ioaddr 0, console com0
# exit
- The first reboot may fail as saying cannot mount root, error = 16
[ 6.0764013] uhub3: single transaction translator
[ 6.4968109] WARNING: findroot: double match for boot device
(bootinfo/bootwedge:wd0 bootinfo/bootwedge:wd1)
[ 6.5168301] raid5: RAID Level 1
[ 6.5268407] raid5: Components: /dev/wd1a /dev/wd0a
[ 6.5268407] raid5: Total Sectors: 159999936 (78124 MB)
[ 6.5568691] WARNING: 3 errors while detecting hardware; check system log.
[ 6.5668794] boot device: wd0
[ 6.5668794] root on wd0a dumps on wd0b
[ 6.5668794] vfs_mountroot: can't open root device
[ 6.5768887] cannot mount root, error = 16
[ 6.5768887] root device (default wd0a): raid5a
[ 16.4264490] dump device (default raid5b):
[ 17.7076926] file system (default generic):
[ 18.3483145] root on raid5a dumps on raid5b
[ 18.3783460] root file system type: ffs
[ 18.3783460] kern.module.path=/stand/amd64/9.3/modules
[ 18.3883539] kern info: [drm] Memory usable by graphics device = 2048M
[ 18.3990870] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 18.4083730] kern info: [drm] Driver supports precise vblank timestamp query.
[ 18.4083730] kern info: [drm] failed to find VBIOS tables
[ 18.4584207] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[ 18.6486087] kern info: [drm] GMBUS [i915 gmbus dpc] timed out,
falling back to bit banging on pin 4
but type
raid5 (in my case) for boot device
- raidctl -A softroot raid5
- reboot
- working fine
Really unbelievable !!
| |
最近の日記
2024年05月08日
・comparison on ./buildsh tools
2024年05月06日
・py-setuptools (python 3.11.9)
・make release took 1 hours and 10 min
・qemu invocation for 10.99.10
2024年05月05日
・Windows 10 version
・serial connection
・bc bench
2024年05月04日
・Trial on 10.99.10
・another version (later trial) to succeed
2024年04月29日
・dkim
|