Copyright (c) 2003-2013 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v3.6.0-RELEASE #10: Sun Nov 24 07:57:21 PST 2013
    root@pkgbox32.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/GENERIC
TSC clock: 2128005512 Hz, i8254 clock: 1193185 Hz
CPU: Intel(R) Xeon(R) CPU           X3210  @ 2.13GHz (2128.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
real memory  = 1071670272 (1022 MB)
avail memory = 1017630720 (970 MB)
lapic: divisor index 0, frequency 133004153 Hz
Initialize MI interrupts
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0xf4f00 00024 (v02 HP    )
ACPI: XSDT 0x3fe667c0 00074 (v01 HP     ProLiant 00000002   ?? 0000162E)
ACPI: FACP 0x3fe66840 000F4 (v03 HP     ProLiant 00000002   ?? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110527/tbfadt-710)
ACPI: DSDT 0x3fe66940 02D63 (v01 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS 0x3fe66100 00040
ACPI: SPCR 0x3fe66140 00050 (v01 HP     SPCRRBSU 00000001   ?? 0000162E)
ACPI: MCFG 0x3fe661c0 0003C (v01 HP     ProLiant 00000001      00000000)
ACPI: HPET 0x3fe66200 00038 (v01 HP     ProLiant 00000002   ?? 0000162E)
ACPI: SPMI 0x3fe66240 00040 (v05 HP     ProLiant 00000001   ?? 0000162E)
ACPI: ERST 0x3fe66280 001D0 (v01 HP     ProLiant 00000001   ?? 0000162E)
ACPI: APIC 0x3fe66480 00092 (v01 HP     ProLiant 00000002      00000000)
ACPI: FFFF 0x3fe66540 00176 (v01 HP     ProLiant 00000001   ?? 0000162E)
ACPI: BERT 0x3fe666c0 00030 (v01 HP     ProLiant 00000001   ?? 0000162E)
ACPI: HEST 0x3fe66700 000BC (v01 HP     ProLiant 00000001   ?? 0000162E)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci21: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci21
pci24: <ACPI PCI bus> on pcib2
pcib2: No _PRT found, routing with pci
pcib3: <MPTABLE PCI-PCI bridge> at device 4.0 on pci24
pci25: <PCI bus> on pcib3
ciss0: <HP Smart Array E200> port 0x4000-0x40ff mem 0xfdf70000-0xfdf77fff,0xfdf80000-0xfdffffff irq 16 at device 8.0 on pci24
ciss0: PERFORMANT Transport
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci18: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib6
bge0: <Broadcom BCM5715 Gigabit Ethernet> mem 0xfdee0000-0xfdeeffff,0xfdef0000-0xfdefffff irq 16 at device 4.0 on pci3
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseT PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:24:81:00:91:14
bge1: <Broadcom BCM5715 Gigabit Ethernet> mem 0xfdec0000-0xfdecffff,0xfded0000-0xfdedffff irq 17 at device 4.1 on pci3
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseT PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: MAC address: 00:24:81:00:91:15
pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci7: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci10: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci13: <ACPI PCI bus> on pcib10
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1000-0x101f irq 21 at device 29.0 on pci0
usb0: <Intel 82801I (ICH9) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1020-0x103f irq 21 at device 29.1 on pci0
usb1: <Intel 82801I (ICH9) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1040-0x105f irq 21 at device 29.2 on pci0
usb2: <Intel 82801I (ICH9) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1060-0x107f irq 21 at device 29.3 on pci0
usb3: <Intel 82801I (ICH9) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdbf0000-0xfdbf03ff irq 21 at device 29.7 on pci0
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xfddf0000-0xfddfffff,0xd8000000-0xdfffffff irq 21 at device 2.0 on pci1
pci1: <base peripheral> (vendor 0x0e11, dev 0xb203) at device 4.0 irq 22
pci1: <base peripheral> (vendor 0x0e11, dev 0xb204) at device 4.2 irq 23
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 23 at device 4.4 on pci1
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
pci1: <serial bus> (vendor 0x103c, dev 0x3302) at device 4.6 irq 22
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0x10b0-0x10bf,0x10a0-0x10af,0x1098-0x109b,0x1090-0x1097,0x1088-0x108b,0x1080-0x1087 irq 20 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <Intel ICH9 SATA300 controller> port 0x10f0-0x10ff,0x10e0-0x10ef,0x10d8-0x10db,0x10d0-0x10d7,0x10c8-0x10cb,0x10c0-0x10c7 irq 20 at device 31.5 on pci0
ata4: <ATA channel 0> on atapci1
ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
kbd2 at ukbd0
ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub5
ums0: 3 buttons
ukbd1: <CHICONY HP Basic USB Keyboard - JP, class 0/0, rev 1.10/3.00, addr 2> on uhub2
kbd3 at ukbd1
disk scheduler: set policy of acd0 to noop
acd0: DVDROM <HL-DT-STDVD-ROM GDR-R10N/2.02> at ata4-master UDMA33
ata5: <ATA channel 1> on atapci1
acpi_tz0: <Thermal Zone> on acpi0
[ACPI Debug]  String [0x0B] "_CRT Method"
[ACPI Debug]  String [0x0B] "_PSV Method"
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio2 at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
ppc0: parallel port not found.
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_CRT Method"
[ACPI Debug]  String [0x0B] "_PSV Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_CRT Method"
[ACPI Debug]  String [0x0B] "_PSV Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
hpt27xx: no controller detected.
CAM: Configuring 6 busses
CAM: finished configuring all busses
disk scheduler: set policy of da0 to noop
disk scheduler: set policy of cd0 to noop
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 5  VOLUME OK> Fixed Direct Access SCSI-5 device 
da0: Serial Number PA6C90P9SWW1Q2
da0: 135.168MB/s transfers
da0: Command Queueing Enabled
da0: 228858MB (468702240 512 byte sectors: 255H 32S/T 57439C)
cd0 at ata2 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDR-R10N 2.02> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from hammer:serno/PA6C90P9SWW1Q2.s1d
HAMMER(ROOT) recovery check seqno=00109312
HAMMER(ROOT) recovery range 300000000178a1c8-300000000178a1c8
HAMMER(ROOT) recovery nexto 300000000178a1c8 endseqno=00109313
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 656k, remaining available: 16384k
Mounting devfs
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
[ACPI Debug]  String [0x0B] "_TMP Method"
umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/0.03, addr 2> on uhub4
(probe8:umass-sim0:0:0:0): Uninitialized Transport 5:b16e7b00?
disk scheduler: set policy of da8 to noop
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Generic STORAGE DEVICE B003> Removable Direct Access SCSI-0 device 
da8: 40.000MB/s transfers
da8: 486MB (996352 512 byte sectors: 64H 32S/T 486C)
[ACPI Debug]  String [0x0B] "_TMP Method"