Type  'go' to resume
Type  help  for more information
ok boot net
Setting Segment Map
Setting RAM Parity Mode
 Mode set to 36-bit
Sizing Memory
Mapping ROM
Mapping RAM
Probing /sbus@1,f8000000 at 0,0  dma esp sd st le 
Probing /sbus@1,f8000000 at 1,0  Nothing there
Probing /sbus@1,f8000000 at 2,0  Nothing there
Probing /sbus@1,f8000000 at 3,0  cgsix 
Can't open input device.
SPARCstation 2, No Keyboard
ROM Rev. 2.4.1, 64 MB memory installed, Serial #8120.
Ethernet address 8:0:20:a:f5:b6, Host ID: 55001fb8.


Rebooting with command: net                                      
Boot device: /sbus/le@0,c00000   File and args: 
13200 
>> NetBSD/sparc Secondary Boot, Revision 1.9
>> (cjs@stoic.fulton.cynic.net, Mon Mar  6 22:35:35 EST 2000)
Booting netbsd
Using BOOTPARAMS protocol: ip address: 210.145.40.125, hostname: ci
root addr=210.145.40.122 path=/netbsd-mini
2326668+114988+226512 [68+150768+109601]=0x2db1a8
OBP version 2, revision 2.4 (plugin rev 2)
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4ZB (GENERIC_SCSI3) #3: Fri Jun  9 16:51:30 EDT 2000
    cjs@stoic.fulton.cynic.net:/u1/netbsd/co/current/src/sys/arch/sparc/compile/GENERIC_SCSI3
total memory = 65412 KB
avail memory = 60672 KB
using 128 buffers containing 512 KB of memory
bootpath: /sbus0/le@0,c00000
mainbus0 (root): SUNW,Sun 4/75
cpu0 at mainbus0: cache chip bug; trap page uncached: CY7C601 @ 40 MHz, TMS390C602A FPU
cpu0: 64K byte write-through, 32 bytes/line, hw flush: cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000 ipl 10 delay constant 17
auxreg0 at mainbus0 ioaddr 0xf7400003
zs0 at mainbus0 ioaddr 0xf1000000 ipl 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 ipl 12 softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
audioamd0 at mainbus0 ioaddr 0xf7201000 ipl 13 softpri 4
audio0 at audioamd0: full duplex
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 20 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1+
esp0 at sbus0 slot 0 offset 0x800000 level 3: ESP100A, 20MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
le0 at sbus0 slot 0 offset 0xc00000 level 5: address 08:00:20:0a:f5:b6
le0: 8 receive buffers, 2 transmit buffers
cgsix0 at sbus0 slot 3 offset 0x0 level 7: SUNW,501-1672, 1152 x 900, rev 8
cgsix0: attached to /dev/fb
fdc0 at mainbus0 ioaddr 0xf7200000 ipl 11 softpri 4: chip 82072
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
scsibus0: waiting 2 seconds for devices to settle...
probe(esp0:2:0): max sync rate 4.03MB/s
sd2 at scsibus0 target 2 lun 0: <SEAGATE, ST1480   SUN0424, 7516> SCSI2 0/direct fixed
sd2: 411 MB, 1476 cyl, 9 head, 63 sec, 512 bytes/sect x 843284 sectors
probe(esp0:3:0): max sync rate 4.03MB/s
sd0 at scsibus0 target 3 lun 0: <SEAGATE, ST1480   SUN0424, 7516> SCSI2 0/direct fixed
sd0: 411 MB, 1476 cyl, 9 head, 63 sec, 512 bytes/sect x 843284 sectors
root on le0
nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: client_addr=210.145.40.125 (RARP from 210.145.40.122)
nfs_boot: server_addr=210.145.40.122
nfs_boot: hostname=ci
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: timeout...
root on harry.ki.nu.:/netbsd-mini
root file system type: nfs
erase ^H, werase ^W, kill ^U, intr ^C
Terminal type? [sun] xterm
Erase is backspace.                                                     
(I)nstall or (U)pgrade?