netbsdboot found.
NetBSD loader module loaded
kernel=/mnt/usbdisk1/netbsd-KUROBOX.bin
load address=0x00090000
boot device=0x00000000
boot flags=0x00000000
cmdline=bootdev=raid0a
cpu freq = 260143200
memory freq = 130071600
memory size = 134217728
startkernel 90000
endkernel 476000
startsym 471d38
endsym 471d38
avail_end 8000000
availmemr[0].start 476000
availmemr[0].size 7b8a000
btinfo = bootdev=raid0a
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.60 (KUROBOX) #0: Wed Jan 18 22:02:49 JST 2012
        root@t-105.i.ki.nu:/export/src-20120117-patched/sys/arch/evbppc/compile/obj/KUROBOX
total memory = 128 MB
avail memory = 120 MB
OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources.
mainbus has not been converted to device_t
mainbus0 (root)
cpu has not been converted to device_t
cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
cpu0: 260.14MHz
eumb has not been converted to device_t
eumb0 at mainbus0
ociic has not been converted to device_t
ociic0 at eumb0 addr 0xfc003000 irq 16: On-Chip I2C controller
iic0 at ociic0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
com0 at eumb0 addr 0xfc004600 irq 25: ns16550a, working fifo
com0: console
com1 at eumb0 addr 0xfc004500 irq 24: ns16550a, working fifo
pci0 at mainbus0 bus 0
pchb has not been converted to device_t
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1057 product 0x0006 (rev. 0x14)
re0 at pci0 dev 11 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at irq 0
re0: Ethernet address 00:16:01:0a:a3:6d
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
satalink0 at pci0 dev 12 function 0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: using irq 1 for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
satalink1 at pci0 dev 13 function 0: Silicon Image SATALink 3512 (rev. 0x01)
satalink1: using irq 4 for native-PCI interrupt
atabus2 at satalink1 channel 0
atabus3 at satalink1 channel 1
ohci0 at pci0 dev 14 function 0: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 14 function 1: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci1: interrupting at irq 3
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 14 function 2: vendor 0x1033 product 0x00e0 (rev. 0x04)
ehci0: interrupting at irq 3
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
satalink0: port 0: device present, speed: 1.5Gb/s
satalink0: port 1: device present, speed: 1.5Gb/s
satalink1: port 0: device present, speed: 1.5Gb/s
satalink1: port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
uhub0 at usb0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2 at usb2: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
wd0: <SAMSUNG SP2504C>
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1 at atabus1 drive 0
wd1: <WDC WD2500JS-00NCB1>
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd2 at atabus2 drive 0
wd2: <SAMSUNG SP2504C>
wd2: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd3 at atabus3 drive 0
wd3: <SAMSUNG SP2504C>
wd3: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: silicon -power, rev 2.00/1.10, addr 2
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <silicon, -power, 0.00> disk removable
sd0: 983 MB, 3932 cyl, 16 head, 32 sec, 512 bytes/sect x 2013184 sectors
WARNING: total sectors < 32 bits, yet numBlocksHi set
WARNING: resetting numBlocksHi to zero.
WARNING: total sectors < 32 bits, yet partitionSizeHi set
WARNING: resetting partitionSizeHi to zero.
sd0: no disk label
raid0: RAID Level 5
raid0: Components: /dev/wd0a /dev/wd1a /dev/wd2a /dev/wd3a
raid0: Total Sectors: 6292704 (3072 MB)
raid2: RAID Level 5
raid2: Components: /dev/wd0b /dev/wd1b /dev/wd2b /dev/wd3b
raid2: Total Sectors: 819072 (399 MB)
raid1: RAID Level 5
raid1: Components: /dev/wd0h /dev/wd1h /dev/wd2h /dev/wd3h
raid1: Total Sectors: 1451445504 (708713 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
Thu Dec  8 09:38:28 GMT 2011
swapctl: /dev/raid2d: Device not configured
Checking for botched superblock upgrades: done.
Starting file system checks:
Can't open /dev/rraid0a: Device not configured
CAN'T CHECK FILE SYSTEM.
/dev/rraid0a: UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY.
Automatic file system check failed; help!
Dec  8 09:38:29 Enter pathname of shell or RETURN for /bin/sh: