netbsdboot found. NetBSD loader module loaded kernel=/mnt/usbdisk1/netbsd-KUROBOX.bin load address=0x00090000 boot device=0x00000000 boot flags=0x00000000 cmdline=bootdev=raid0a cpu freq = 260143200 memory freq = 130071600 memory size = 134217728 startkernel 90000 endkernel 792000 startsym 78de58 endsym 78de58 avail_end 8000000 availmemr[0].start 792000 availmemr[0].size 786e000 btinfo = bootdev=raid Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.0_BETA (INSTALL_KUROBOX) #0: Wed Feb 29 08:54:46 JST 2012 root@t-105.i.ki.nu:/export/src-netbsd-6-patched/sys/arch/evbppc/compile/obj/INSTALL_KUROBOX total memory = 128 MB avail memory = 117 MB OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources. mainbus0 (root) cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary) cpu0: HID0 0x90c000, powersave: 1 cpu0: 260.14MHz eumb0 at mainbus0 ociic0 at eumb0 addr 0xfc003000 irq 16: On-Chip I2C controller iic0 at ociic0: I2C bus rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock com0 at eumb0 addr 0xfc004600 irq 25: ns16550a, working fifo com0: console com1 at eumb0 addr 0xfc004500 irq 24: ns16550a, working fifo pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x1057 product 0x0006 (rev. 0x14) re0 at pci0 dev 11 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10) re0: interrupting at irq 0 re0: Ethernet address 00:16:01:0a:a3:6d rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto satalink0 at pci0 dev 12 function 0: Silicon Image SATALink 3512 (rev. 0x01) satalink0: using irq 1 for native-PCI interrupt atabus0 at satalink0 channel 0 atabus1 at satalink0 channel 1 satalink1 at pci0 dev 13 function 0: Silicon Image SATALink 3512 (rev. 0x01) satalink1: using irq 4 for native-PCI interrupt atabus2 at satalink1 channel 0 atabus3 at satalink1 channel 1 ohci0 at pci0 dev 14 function 0: vendor 0x1033 product 0x0035 (rev. 0x43) ohci0: interrupting at irq 3 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 ohci1 at pci0 dev 14 function 1: vendor 0x1033 product 0x0035 (rev. 0x43) ohci1: interrupting at irq 3 ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 ehci0 at pci0 dev 14 function 2: vendor 0x1033 product 0x00e0 (rev. 0x04) ehci0: interrupting at irq 3 ehci0: companion controllers, 3 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 satalink0: port 0: device present, speed: 1.5Gb/s satalink0: port 1: device present, speed: 1.5Gb/s satalink1: port 0: device present, speed: 1.5Gb/s satalink1: port 1: device present, speed: 1.5Gb/s wd0 at atabus0 drive 0 uhub0 at usb0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2 at usb2: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 wd0: wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd1 at atabus1 drive 0 wd1: wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd2 at atabus2 drive 0 wd2: wd2: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd3 at atabus3 drive 0 wd3: wd3: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors umass0 at uhub2 port 2 configuration 1 interface 0 umass0: vendor 0x05e3 USB Storage, rev 2.00/0.03, addr 2 scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: fabricating a geometry sd0: 486 MB, 486 cyl, 64 head, 32 sec, 512 bytes/sect x 996352 sectors sd0: fabricating a geometry sd0: no disk label raid0: RAID Level 5 raid0: Components: /dev/wd0a /dev/wd1a /dev/wd2a /dev/wd3a raid0: Total Sectors: 6292704 (3072 MB) raid2: RAID Level 5 raid2: Components: /dev/wd0b /dev/wd1b /dev/wd2b /dev/wd3b raid2: Total Sectors: 819072 (399 MB) raid1: RAID Level 5 raid1: Components: /dev/wd0h /dev/wd1h /dev/wd2h /dev/wd3h raid1: Total Sectors: 1451445504 (708713 MB) boot device: raid0 root on md0a dumps on md0b root file system type: ffs erase ^H, werase ^W, kill ^U, intr ^C, status ^T mount_tmpfs: tmpfs on /tmp: Operation not supported by device Terminal type? [vt100] xterm Erase is backspace. (I)nstall, (S)hell or (H)alt ? s #