Open Firmware, 2.4
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
For Open Firmware serial I/O type:
TTYA IO<return>
 ok
0 > printenv 

VARIABLE            CURRENT             DEFAULT
little-endian?      false               false
real-mode?          false               false
auto-boot?          false               true
diag-switch?        false               false
fcode-debug?        false               false
oem-banner?         false               false
oem-logo?           false               false
use-nvramrc?        true                false
real-base           F00000              -1 
real-size           100000              100000 
virt-base           -1                  -1 
virt-size           100000              100000 
load-base           600000              4000 
pci-probe-list      -1                  -1 
screen-#columns     64                  64 
screen-#rows        28                  28 
selftest-#megs      0                   0 
boot-device         ide/@0:1            /AAPL,ROM
boot-file                               
diag-device                             fd:\diags
diag-file                               
input-device        ttya                kbd
output-device       ttya                screen
oem-banner                              
oem-logo                                
nvramrc             
     hex
     : $D find-device ;
     : $E device-end ;
     : $L BLpatch ; : $R BRpatch ;
     : $X execute ;
     : $p 0 to my-self property ;
     : $a " /chosen" $D $p $E ;
     : helpb ['] install-interrupt-vectors ['] noop $R
     0 4000 release-mem 8000 2000 release-mem ;
     10 buffer: km
     dev kbd
     get-key-map km swap move
     $E
     : ck 0 do swap dup 3 >> km + c@ 1 rot 7 and << and or loop ;
     : bootr 0d word count encode-string " machargs" $a
     0 0 1 ck if 0 and else dup 1 = if 3d 0 1 else f 3d 0 2 then ck if 40 or then then
     40 and if bye else helpb 1e 0 do ['] boot catch drop 1f4 ms loop then bye ;
     : myboot boot-command eval ;
     dev /packages/mac-parts
     : $M 7F00 - 4 ;
     ' my-init-program 34 + ' $M $L
     ' load-partition dup
     80 + ' 2drop $L
     104 + ' 0 $L
     ' load 15C + ' 0 $L
     $E
     dev /packages/obp-tftp
     : $M dup 24 - HIS-ENET-HA 6 move 14 + ;
     ' open 66C - ' $M $L
     $E
     dev mac-io
     : decode-unit parse-1hex ;
     $E
     ff000000 dup dup 400 28 do-map 4+ w@ 10 and 0=
     if 90b7 f3000032 w! then
     unselect-dev                       
boot-command        0 bootr             boot
 ok
0 > 0 bootr 
>> NetBSD/macppc OpenFirmware Boot, Revision 1.5
>> (root@serv, Thu Jul 31 15:13:58 JST 2003)
4166308+239408 [210448+175936]=0x4921d8
 start=0x100000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6U (GENERIC) #0: Thu Jul 31 15:41:34 JST 2003
        root@serv:/export/20030726ts/src/sys/arch/macppc/compile/GENERIC
total memory = 128 MB
avail memory = 111 MB
using 1664 buffers containing 6656 KB of memory
bootpath: /pci@80000000/mac-io@10/ide@20000/@0
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 202), ID 0 (primary)
cpu0: HID0 8090c0a4<EMCP,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
cpu0: 1MB backside L2 cache
grackle0 at mainbus0
pci0 at grackle0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40)
tlp0 at pci0 dev 14 function 0: DECchip 21140A Ethernet, pass 2.2
tlp0: interrupting at irq 24
tlp0: Ethernet address 00:c0:95:**:**:**
tlp0: 10baseT, 100baseTX
ofb0 at pci0 dev 15 function 0: cannot map framebuffer
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:**:**:**
zsc0 at obio0 offset 0x13000: irq 15,5,16,7
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs0 at obio0 offset 0x14000: irq 17,8,9
audio0 at awacs0: full duplex
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
wdc0 at obio0 offset 0x20000 irq 13
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLP LM10.2>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9797 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 20066251 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc1 at obio0 offset 0x21000 irq 14
atapibus0 at wdc1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITA CR-587, , 7S14> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: keyboard II
wskbd0 at akbd0 (mux ignored)
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0 (mux ignored)
ofb1 at pci0 dev 18 function 0: ATI Technologies 3D Rage Pro
ofb1: 1024 x 768, 8bpp
wsdisplay0 at ofb1 (kbdmux ignored)
scsibus0: waiting 2 seconds for devices to settle...
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
Fri Apr  9 07:26:55 GMT 1976
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
/dev/rwd0a: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: g3mt
NIS domainname: *****.*****.****
IPv6 mode: host
Configuring network interfaces: tlp0.
add net default: gateway 192.168.**.*
Adding interface aliases:
Building databases...
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
Starting inetd.
Starting cron.
Fri Apr
NetBSD/macppc (g3mt) (tty00)

login: Apr  9 07:27:03 g3mt getty[244]: /dev/ttyE0: Device not configured