NetBSD 絹の日記

(-1) Get KuroBox Pro
(0) Get serial console at the bottom (115.2kbps) USB like connector. (See photo below, click enlarges).

 cd /export
 mkdir orion_nas
 cd orion_nas
 wget ftp://ftp.jp.netbsd.org/pub/NetBSD/misc/kiyohara/orion_nas/orion_nas-20081107.diff
 wget ftp://ftp.jp.netbsd.org/pub/NetBSD/misc/kiyohara/orion_nas/orion_nas-20081107.tar.gz

The shell commands issued are:

pts/1:makoto@t-105 9:50:03/090403(/export/src)>
cvs -Q -d ${REPOSITORY} co -D 20081107 src && cd src && cvs -Q update -dP .
patch -s -p0 <  ../orion_nas/orion_nas-20081107.diff 
tar zxf ../orion_nas/orion_nas-20081107.tar.gz 
time sudo ./build.sh -m evbarm -j 4 release > & ../log-release
9239.373u 1268.966s 56:42.20 308.8%     0+0k 4311+1844659io 5685pf+0w

By this build, the kernel KUROBOX_PRO KUROBOX_TERA are not automatically build. So build kernel manually.

pts/0:makoto@t-105 17:23:23/090504(/export/src)> \
time sudo ./build.sh -j 8 -m evbarm \
-T /export/src/tooldir.NetBSD-5.0_BETA-i386 \
kernel=KUROBOX_PRO > & ../KUROBOX_PRO-log

Here I've got an error like:

src/sys/arch/arm/marvell/if_oriongbe.c:504: error: 'status' undeclared (first use in this function)

Edit the file

src/sys/arch/arm/marvell/if_oriongbe.c

and adding the line 462:

455 static int
456 oriongbe_intr(void *arg)
457 {
458         struct oriongbe_softc *sc = arg;
459         struct ifnet *ifp = &sc->sc_ethercom.ec_if;
460         uint32_t ic, ice;
461         int claimed = 0;
462         int status = 0;

With this change, the kernel is built, and

(1-2) Prepare bootp/tftp server and place kernel with -O binary version. Power on the KUROBOX_PRO and interrupt twice when booting: Then issue:
```
bootp 8000; go 8000
```
it runs to the point asking device file.
(1-3) Then I've got the changes to enable sysinst kernel.
Changed:
etc/etc.evbarm/Makefile.inc
distrib/evbarm/instkernel/instkernel/Makefile
distrib/utils/sysinst/arch/evbarm/md.h
distrib/utils/sysinst/arch/evbarm/
(above four tar + gzipped) 20090504-kurobox-patches.tar.gz
Added:
sys/arch/evbarm/conf/KUROBOX_PRO_INSTALL
sys/arch/evbarm/conf/KUROBOX_TERA_INSTALL
(2) Again, build release:
time sudo ./build.sh -j 8 -m evbarm release
(3) gunzip the kernel (netbsd-KUROBOX_PRO_INSTALL.bin) and put it on bootp server:
Do the same thing on (1-2):
(4) sysinst now starts. You may select NFS or FTP depending on your server convenience:
(5) Replace install kernel by normal kernel on bootp server:
(6) and boot as
```
    bootp 8000; go 8000
```
This should run upto regular multi-user environment.

(7) PROBLEM

Can't Boot stand alone for now.
Currently bootp server is necessary. Ext2fs and uImage may be one of the work around.
Related ? (ftp://ftp.jp.netbsd.org/pub/NetBSD/misc/kiyohara/tmp/u-boot-mkimg.sh)
NFS client may have a problem.
```
     cvs -D /NFSserver/hoge co pkgsrc
```
may soon hang up to some point. Control-T will say: load: 0.00 cmd: cvs 333 [uvn_fp2] 0.51u 8.70s 0% 2440k
Reboot won't make it: It won't proceed after following line displayed.
```
       Orion1   CPU =  Low  
```

halt -p halts, but won't power off.

---------------------------
syncing disks... done
unmounting file systems...
unmounting /dev/pts (ptyfs)...
unmounting /kern (kernfs)...
unmounting /export (/dev/wd0g)...
unmounting /mnt/var (/dev/wd0f)...
unmounting /usr (/dev/wd0e)...
unmounting / (/dev/wd0a)... done
The operating system has halted.
Please press any key to reboot.
---------------------------
  pressing key here does not proceed after following line:
---------------------------
rebooting...
Orion1   CPU =  Low 
---------------------------

(8) binary and source
I have placed the binary and source at:
(ftp://ftp.ki.nu/pub/NetBSD/snapshot/20081107/evbarm/)

(ftp://ftp.ki.nu/pub/NetBSD/snapshot/20081107/source/)

2009年05月04日(月) 旧暦 [n年日記] [更新:"2009/05/07 02:08:17"]

#1 [NetBSD] status for Marvell Orion support (5.99.01)