Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.16 (GENERIC) #1: Sat Jan 12 23:45:29 JST 2013 root@t-105:/export/src/sys/arch/amd64/compile/obj/GENERIC total memory = 8190 MB avail memory = 7937 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Dell Inc. PowerEdge T105 ((none)) mainbus0 (root) cpu0 at mainbus0 apid 0: Quad-Core AMD Opteron(tm) Processor 1352, id 0x100f23 cpu1 at mainbus0 apid 1: Quad-Core AMD Opteron(tm) Processor 1352, id 0x100f23 cpu2 at mainbus0 apid 2: Quad-Core AMD Opteron(tm) Processor 1352, id 0x100f23 cpu3 at mainbus0 apid 3: Quad-Core AMD Opteron(tm) Processor 1352, id 0x100f23 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 24 pins acpi0 at mainbus0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId , AslId ioapic0 reenabling acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button MEM0 (PNP0C01) at acpi0 not configured EXPL (PNP0C02) at acpi0 not configured PMIO (PNP0C02) at acpi0 not configured SYS0 (PNP0C02) at acpi0 not configured attimer1 at acpi0 (PIT0, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPK0, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 IOCR (PNP0C02) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa4) at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x0051 (rev. 0xf1) nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0052 (rev. 0xa2) nfsmb0 at nfsmbc0 SMBus 1 iic0 at nfsmb0: I2C bus nfsmb1 at nfsmbc0 SMBus 2 iic1 at nfsmb1: I2C bus ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2) LUS0: Picked IRQ 20 with weight 0 ohci0: interrupting at ioapic0 pin 20 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x005b (rev. 0xa4) LUS2: Picked IRQ 21 with weight 0 ehci0: interrupting at ioapic0 pin 21 ehci0: EHCI version 1.0 ehci0: companion controller, 4 ports each: ohci0 usb1 at ehci0: USB revision 2.0 viaide0 at pci0 dev 7 function 0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3) viaide0: bus-master DMA support present viaide0: primary channel wired to native-PCI mode LTID: Picked IRQ 22 with weight 0 viaide0: using ioapic0 pin 22 for native-PCI interrupt atabus0 at viaide0 channel 0 viaide0: secondary channel wired to native-PCI mode atabus1 at viaide0 channel 1 viaide1 at pci0 dev 8 function 0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3) viaide1: bus-master DMA support present viaide1: primary channel wired to native-PCI mode LSI1: Picked IRQ 23 with weight 0 viaide1: using ioapic0 pin 23 for native-PCI interrupt atabus2 at viaide1 channel 0 viaide1: secondary channel wired to native-PCI mode atabus3 at viaide1 channel 1 ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xf2) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga0 at pci1 dev 8 function 0: vendor 0x1002 product 0x515e (rev. 0x02) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 radeondrm0 at vga0: ATI ES1000 RN50 radeondrm0: Initialized radeon 1.29.0 20080613 ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x005d (rev. 0xf3) ppb1: PCI Express 1.0 x2 @ 2.5Gb/s pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok bge0 at pci2 dev 0 function 0: Broadcom BCM5722 Gigabit Ethernet LNK2: Picked IRQ 16 with weight 0 bge0: interrupting at ioapic0 pin 16 bge0: adjust device control 0x192000 -> 0x195000 bge0: ASIC BCM5755 C0 (0xa200), Ethernet address 00:1e:c9:58:4b:81 bge0: setting short Tx thresholds brgphy0 at bge0 phy 1: BCM5722 1000BASE-T media interface, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb2 at pci0 dev 12 function 0: vendor 0x10de product 0x005d (rev. 0xf3) ppb2: PCI Express 1.0 x2 @ 2.5Gb/s pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok ppb3 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (rev. 0xf3) ppb3: PCI Express 1.0 x8 @ 2.5Gb/s pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok ppb4 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3) ppb4: PCI Express 1.0 x8 @ 2.5Gb/s pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled, rd/line, wr/inv ok pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00) pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00) pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00) amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration pchb3 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00) isa0 at pcib0 tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x4a100000 rev 0x4e com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu0: P0: FFH, lat 19 us, pow 27000 mW, 2100 MHz acpicpu0: P1: FFH, lat 19 us, pow 24480 mW, 1800 MHz acpicpu0: P2: FFH, lat 19 us, pow 21965 mW, 1600 MHz acpicpu0: P3: FFH, lat 19 us, pow 18810 mW, 1300 MHz acpicpu0: P4: FFH, lat 19 us, pow 16170 mW, 1050 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 50 % acpicpu1 at cpu1: ACPI CPU acpicpu2 at cpu2: ACPI CPU acpicpu3 at cpu3: ACPI CPU timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 2109781090 Hz quality 3000 uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered viaide0 port 0: device present, speed: 3.0Gb/s viaide1 port 0: device present, speed: 1.5Gb/s viaide0 port 1: device present, speed: 1.5Gb/s wd0 at atabus0 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus1 drive 0 wd1: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd1(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus2: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) cd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) ehci0: handing over low speed device on port 3 to ohci0 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture boot device: wd1 root on wd1a dumps on wd1b root file system type: ffs WARNING: clock gained 13 days uhidev0 at uhub0 port 3 configuration 1 interface 0 uhidev0: CHICONY HP Basic USB Keyboard - JP, rev 1.10/3.00, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 cprng sysctl: WARNING pseudorandom rekeying. wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) cprng kernel: WARNING pseudorandom rekeying.