Open Firmware, 2.0.2 To continue booting the MacOS type: BYE To continue booting from the default boot device type: BOOT ok 0 > boot fd:0 - >> NetBSD/macppc OpenFirmware Boot, Revision 1.1 >> (tsutsui@lancer, Mon Dec 7 00:15:44 JST 1998) Boot: /netbsd Booting fd/netbsd 2844000@0x100000+145576@0x3b6560 start=0x100000 Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 1.3I (INSTALL) #13: Thu Dec 10 00:41:36 JST 1998 tsutsui@lancer:/usr/src/sys/arch/macppc/compile/INSTALL CPU: 603ev (Revision 201) real mem = 100663296 avail mem = 89702400 using 800 buffers containing 3276800 bytes of memory mainbus0 (root) cpu0 at mainbus0: L2 cache enabled pci0 at mainbus0 bus 0 pci0: i/o enabled, memory enabled pchb0 at pci0 dev 11 function 0 pchb0: vendor 0x106b product 0x0001 (rev. 0x03) de0 at pci0 dev 13 function 0 de0: interrupting at irq 23 de0: 21041 [10Mb/s] pass 1.1 de0: address 00:40:10:09:77:f1 obio0 at pci0 dev 16 function 0: addr 0xf3000000 mesh0 at obio0 offset 0x10000 irq 12: MESH SCSI ID 7 scsibus0 at mesh0: 8 targets sd0 at scsibus0 targ 4 lun 0: SCSI2 0/direct fixed sd0: 699MB, 3658 cyl, 4 head, 97 sec, 512 bytes/sect x 1431760 sectors zsc0 at obio0 offset 0x13000: irq 15,16 zstty0 at zsc0 channel 0 (console) zstty1 at zsc0 channel 1 awacs at obio0 offset 0x14000 not configured swim3 at obio0 offset 0x15000 not configured nvram0 at obio0 offset 0x60000 wdc0 at obio0 offset 0x20000 irq 13 wd0 at wdc0 channel 0 drive 0: wd0: drive supports 16-sector pio transfers, lba addressing wd0: 2446MB, 4970 cyl, 16 head, 63 sec, 512 bytes/sect x 5009760 sectors wd0: drive supports PIO mode 4, DMA mode 2 wdc1 at obio0 offset 0x21000 irq 14 adb0 at obio0 offset 0x16000 irq 18: 2 targets akbd0 at adb0 addr 2: extended keyboard wskbd0 at akbd0 ams0 at adb0 addr 3: 1-button, 100 dpi mouse wsmouse at ams0 not configured ofb0 at pci0 dev 17 function 0: 1280 x 1024, 8bpp wsdisplay0 at ofb0 vendor 0x1011 product 0x0021 (PCI bridge, revision 0x01) at pci0 dev 20 function 0 not configured de0: enabling 10baseT port wscons: wskbd0 glued to wsdisplay0 md0: internal 1536K image area boot device: root on md0a dumps on md0b root file system type: ffs erase ^H, werase ^W, kill ^U, intr ^C, status ^T Terminal type? [vt100] sun Erase is backspace. # ifconfig de0 210.145.40.124 # ping 210.145.40.114 PING 210.145.40.114 (210.145.40.114): 56 data bytes 64 bytes from 210.145.40.114: icmp_seq=0 ttl=255 time=1.683 ms 64 bytes from 210.145.40.114: icmp_seq=1 ttl=255 time=1.111 ms ^C ----210.145.40.114 PING Statistics---- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max = 1.111/1.397/1.683 ms # telnet 210.145.40.124 telnet: not found # ls .profile dev kern mnt2 sysinst usr bin etc mnt sbin tmp var # mkdir /nfs # df . Filesystem 512-blocks Used Avail Capacity Mounted on /dev/md0a 2895 2805 90 96% / # mount 210.145.40.120:/home-ftp/pub /nfs # ls /nfs .netatalk gif msdos ...... (omitted) #