Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.3 (KUROBOX) #0: Mon Oct 30 19:30:30 JST 2006
        root@trapani:/work/20061019/sys/arch/evbppc/compile/obj/KUROBOX
total memory = 128 MB
avail memory = 120 MB
mainbus0 (root)
cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
cpu0: HID0 90c000<DOZE,DPM,ICE,DCE>, powersave: 1
cpu0: 260.14MHz
eumb0 at mainbus0
ociic0 at eumb0 addr 0xfc003000 irq 5: On-Chip I2C controller
iic0 at ociic0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
com0 at eumb0 addr 0xfc004600 irq 14: ns16550a, working fifo
com0: console
com1 at eumb0 addr 0xfc004500 irq 13: ns16550a, working fifo
pci0 at mainbus0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1057 product 0x0006 (rev. 0x14)
re0 at pci0 dev 11 function 0: RealTek 8169S Single-chip Gigabit Ethernet
re0: interrupting at irq 0
re0: Ethernet address 00:0d:0b:69:7c:e5
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
iteide0 at pci0 dev 12 function 0
iteide0: Integrated Technology Express IDE controller (rev. 0x13)
iteide0: bus-master DMA support present
iteide0: primary channel wired to native-PCI mode
iteide0: using irq 1 for native-PCI interrupt
atabus0 at iteide0 channel 0
iteide0: secondary channel wired to native-PCI mode
atabus1 at iteide0 channel 1
ohci0 at pci0 dev 14 function 0: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 14 function 1: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci1: interrupting at irq 3
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 14 function 2: vendor 0x1033 product 0x00e0 (rev. 0x04)
ehci0: interrupting at irq 3
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
biomask a netmask b ttymask b
wd0 at atabus0 drive 0: <WDC AC23200L>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 3098 MB, 6296 cyl, 16 head, 63 sec, 512 bytes/sect x 6346368 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(iteide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
iteide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
iteide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(iteide0:0:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA)
wd0d: DMA error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: transfer error, downgrading to PIO mode 4
wd0(iteide0:0:0): using PIO mode 0
wd0d: error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: (aborted command, interface CRC error)
wd0: soft error (corrected)
root file system type: ffs
kuro-hg#