Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0 (XEN3_DOM0-nopckbc) #18: Mon Feb 18 12:57:15 JST 2008 makoto@genova:/export/tar/usr/src/sys/arch/i386/compile/XEN3_DOM0-nopckbc total memory = 512 MB avail memory = 492 MB timecounter: Timecounters tick every 10.000 msec BIOS32 rev. 0 found at 0xf0010 mainbus0 (root) mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature mainbus0: scanning 0xf0000 to 0xffff0 for MP signature mainbus0: MP floating pointer found in bios at 0xff780 mainbus0: MP config table at 0xfb670, 320 bytes long cpu0 at mainbus0: apid 0 (boot processor) ioapic0 at mainbus0 apid 1 (I/O APIC) ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins ioapic0: enabling hypervisor0 at mainbus0 vcpu0 at hypervisor0: (uniprocessor) vcpu0: AMD Unknown K7 (Athlon) (686-class), 2200.05 MHz, id 0x40ff2 vcpu0: features 78bfbff vcpu0: features 78bfbff vcpu0: features 78bfbff identifycpu:1345:../../../../arch/xen/i386/identcpu.c vendor(3) AMD(3) vcpu0: (2) AMD Power Management features: 80000018 vcpu0: AMD Power Management features: 3f vcpu0: (3) AMD Power Management features: 3f 6 1 identifycpu:1348:../../../../arch/xen/i386/identcpu.c CPUID2FAMILYD(f) identifycpu:1358:../../../../arch/xen/i386/identcpu.c k8_powernow_init_main: 383:../../../../arch/x86/x86/powernow_k8.c status(40e020e) k8_powernow_init_main: 386:../../../../arch/x86/x86/powernow_k8.c fid(e) vid(e) vcpu0: AMD PowerNow! Technology 2200 MHz vcpu0: available frequencies (Mhz): 1000 1800 2000 2200 debug virtual interrupt using event channel 1 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver npx0 at hypervisor0: using exception 16 acpi0 at hypervisor0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20060217 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 ACPI-Safe 24-bit timer mpacpi: found root PCI bus 0 at level 1 mpacpi: found subordinate bus 1 at level 2 mpacpi: found subordinate bus 7 at level 2 mpacpi: found subordinate bus 6 at level 2 mpacpi: found subordinate bus 5 at level 2 mpacpi: found subordinate bus 2 at level 2 mpacpi: 6 PCI busses mpacpi: ISA interrupt override 0 -> 2 mpacpi: ISA interrupt override 9 -> 9 mpacpi: ISA interrupt override 14 -> 14 mpacpi: ISA interrupt override 15 -> 15 mpacpi: configuring PCI bus 0 int routing LSMB: Links after initial probe: Link Device LSMB: Index IRQ Rtd Ref IRQs 0 11 N 0 20 21 22 23 polarity 1 trigger 0 LSMB: Links after initial validation: Link Device LSMB: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LSMB: Links after disable: Link Device LSMB: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LPMU: Links after initial probe: Link Device LPMU: Index IRQ Rtd Ref IRQs 0 5 N 0 20 21 22 23 polarity 1 trigger 0 LPMU: Links after initial validation: Link Device LPMU: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LPMU: Links after disable: Link Device LPMU: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LUB0: Links after initial probe: Link Device LUB0: Index IRQ Rtd Ref IRQs 0 7 N 0 20 21 22 23 polarity 1 trigger 0 LUB0: Links after initial validation: Link Device LUB0: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LUB0: Links after disable: Link Device LUB0: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LUB2: Links after initial probe: Link Device LUB2: Index IRQ Rtd Ref IRQs 0 7 N 0 20 21 22 23 polarity 1 trigger 0 LUB2: Links after initial validation: Link Device LUB2: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LUB2: Links after disable: Link Device LUB2: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LSA0: Links after initial probe: Link Device LSA0: Index IRQ Rtd Ref IRQs 0 10 N 0 20 21 22 23 polarity 1 trigger 0 LSA0: Links after initial validation: Link Device LSA0: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LSA0: Links after disable: Link Device LSA0: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LSA1: Links after initial probe: Link Device LSA1: Index IRQ Rtd Ref IRQs 0 11 N 0 20 21 22 23 polarity 1 trigger 0 LSA1: Links after initial validation: Link Device LSA1: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LSA1: Links after disable: Link Device LSA1: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LSA2: Links after initial probe: Link Device LSA2: Index IRQ Rtd Ref IRQs 0 5 N 0 20 21 22 23 polarity 1 trigger 0 LSA2: Links after initial validation: Link Device LSA2: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LSA2: Links after disable: Link Device LSA2: Index IRQ Rtd Ref IRQs 0 255 N 0 20 21 22 23 polarity 1 trigger 0 LNEB: Links after initial probe: Link Device LNEB: Index IRQ Rtd Ref IRQs 0 10 N 0 16 17 18 19 polarity 1 trigger 0 LNEB: Links after initial validation: Link Device LNEB: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNEB: Links after disable: Link Device LNEB: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNEC: Links after initial probe: Link Device LNEC: Index IRQ Rtd Ref IRQs 0 10 N 0 16 17 18 19 polarity 1 trigger 0 LNEC: Links after initial validation: Link Device LNEC: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNEC: Links after disable: Link Device LNEC: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNED: Links after initial probe: Link Device LNED: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNED: Links after initial validation: Link Device LNED: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNED: Links after disable: Link Device LNED: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNEA: Links after initial probe: Link Device LNEA: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNEA: Links after initial validation: Link Device LNEA: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNEA: Links after disable: Link Device LNEA: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 mpacpi: configuring PCI bus 1 int routing LNKB: Links after initial probe: Link Device LNKB: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKB: Links after initial validation: Link Device LNKB: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKB: Links after disable: Link Device LNKB: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKC: Links after initial probe: Link Device LNKC: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKC: Links after initial validation: Link Device LNKC: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKC: Links after disable: Link Device LNKC: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKD: Links after initial probe: Link Device LNKD: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKD: Links after initial validation: Link Device LNKD: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKD: Links after disable: Link Device LNKD: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKA: Links after initial probe: Link Device LNKA: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKA: Links after initial validation: Link Device LNKA: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 LNKA: Links after disable: Link Device LNKA: Index IRQ Rtd Ref IRQs 0 255 N 0 16 17 18 19 polarity 1 trigger 0 mpacpi: configuring PCI bus 7 int routing mpacpi: configuring PCI bus 6 int routing mpacpi: configuring PCI bus 5 int routing mpacpi: configuring PCI bus 2 int routing ioapic0: pin 2 attached to isa0 irq 0 (type 0 flags 0) ioapic0: pin 1 attached to isa0 irq 1 (type 0 flags 0) ioapic0: pin 3 attached to isa0 irq 3 (type 0 flags 0) ioapic0: pin 4 attached to isa0 irq 4 (type 0 flags 0) ioapic0: pin 5 attached to isa0 irq 5 (type 0 flags 0) ioapic0: pin 6 attached to isa0 irq 6 (type 0 flags 0) ioapic0: pin 7 attached to isa0 irq 7 (type 0 flags 0) ioapic0: pin 8 attached to isa0 irq 8 (type 0 flags 0) ioapic0: pin 9 attached to isa0 irq 9 (type 0 flags d) ioapic0: pin 10 attached to isa0 irq 10 (type 0 flags 0) ioapic0: pin 11 attached to isa0 irq 11 (type 0 flags 0) ioapic0: pin 12 attached to isa0 irq 12 (type 0 flags 0) ioapic0: pin 13 attached to isa0 irq 13 (type 0 flags 0) ioapic0: pin 14 attached to isa0 irq 14 (type 0 flags 5) ioapic0: pin 15 attached to isa0 irq 15 (type 0 flags 5) linkdev LSMB attached to pci0 device 1 INT_A (type 0 flags f) linkdev LPMU attached to pci0 device 1 INT_B (type 0 flags f) linkdev LUB0 attached to pci0 device 2 INT_A (type 0 flags f) linkdev LUB2 attached to pci0 device 2 INT_B (type 0 flags f) linkdev LSA0 attached to pci0 device 5 INT_A (type 0 flags f) linkdev LSA1 attached to pci0 device 5 INT_B (type 0 flags f) linkdev LSA2 attached to pci0 device 5 INT_C (type 0 flags f) linkdev LNEB attached to pci0 device 15 INT_A (type 0 flags f) linkdev LNEC attached to pci0 device 15 INT_B (type 0 flags f) linkdev LNED attached to pci0 device 15 INT_C (type 0 flags f) linkdev LNEA attached to pci0 device 15 INT_D (type 0 flags f) linkdev LNEC attached to pci0 device 14 INT_A (type 0 flags f) linkdev LNED attached to pci0 device 14 INT_B (type 0 flags f) linkdev LNEA attached to pci0 device 14 INT_C (type 0 flags f) linkdev LNEB attached to pci0 device 14 INT_D (type 0 flags f) linkdev LNED attached to pci0 device 13 INT_A (type 0 flags f) linkdev LNEA attached to pci0 device 13 INT_B (type 0 flags f) linkdev LNEB attached to pci0 device 13 INT_C (type 0 flags f) linkdev LNEC attached to pci0 device 13 INT_D (type 0 flags f) linkdev LNEC attached to pci0 device 10 INT_A (type 0 flags f) linkdev LNED attached to pci0 device 10 INT_B (type 0 flags f) linkdev LNEA attached to pci0 device 10 INT_C (type 0 flags f) linkdev LNEB attached to pci0 device 10 INT_D (type 0 flags f) linkdev LNKB attached to pci1 device 8 INT_A (type 0 flags f) linkdev LNKC attached to pci1 device 8 INT_B (type 0 flags f) linkdev LNKD attached to pci1 device 8 INT_C (type 0 flags f) linkdev LNKA attached to pci1 device 8 INT_D (type 0 flags f) linkdev LNKA attached to pci1 device 9 INT_A (type 0 flags f) linkdev LNKB attached to pci1 device 9 INT_B (type 0 flags f) linkdev LNKC attached to pci1 device 9 INT_C (type 0 flags f) linkdev LNKD attached to pci1 device 9 INT_D (type 0 flags f) linkdev LNEB attached to pci7 device 0 INT_A (type 0 flags f) linkdev LNEC attached to pci7 device 0 INT_B (type 0 flags f) linkdev LNED attached to pci7 device 0 INT_C (type 0 flags f) linkdev LNEA attached to pci7 device 0 INT_D (type 0 flags f) linkdev LNEC attached to pci6 device 0 INT_A (type 0 flags f) linkdev LNED attached to pci6 device 0 INT_B (type 0 flags f) linkdev LNEA attached to pci6 device 0 INT_C (type 0 flags f) linkdev LNEB attached to pci6 device 0 INT_D (type 0 flags f) linkdev LNED attached to pci5 device 0 INT_A (type 0 flags f) linkdev LNEA attached to pci5 device 0 INT_B (type 0 flags f) linkdev LNEB attached to pci5 device 0 INT_C (type 0 flags f) linkdev LNEC attached to pci5 device 0 INT_D (type 0 flags f) linkdev LNEC attached to pci2 device 0 INT_A (type 0 flags f) linkdev LNED attached to pci2 device 0 INT_B (type 0 flags f) linkdev LNEA attached to pci2 device 0 INT_C (type 0 flags f) linkdev LNEB attached to pci2 device 0 INT_D (type 0 flags f) ioapic0: int9 189a0 1000000 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured ACPI Object Type 'Processor' (0x0c) at acpi0 not configured PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured PNP0000 [AT Interrupt Controller] at acpi0 not configured PNP0200 [AT DMA Controller] at acpi0 not configured PNP0100 [AT Timer] at acpi0 not configured PNP0B00 [AT Real-Time Clock] at acpi0 not configured PNP0800 [AT-style speaker sound] at acpi0 not configured PNP0C04 [Math Coprocessor] at acpi0 not configured PNP0501 [16550A-compatible COM port] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0103 [HPET Timer] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured IPI0001 ACPI Error (nsxfeval-0216): Incorrect return type [Buffer] requested [String] [20060217] at acpi0 not configured acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured PNP0C0F [PCI interrupt link device] at acpi0 not configured pci0 at hypervisor0 bus 0: configuration mode 1hypervisor0: added to list as bus 0 pci0: i/o space, memory space enabled NVIDIA nForce MCP55 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0 pcib0: NVIDIA product 0x0360 (rev. 0xa3) NVIDIA nForce MCP55 SMBus Controller (SMBus serial bus, revision 0xa3) at pci0 dev 1 function 1 not configured ohci0 at pci0 dev 2 function 0: NVIDIA nForce MCP55 OHCI USB Controller (rev. 0xa1) LUB0: Picked IRQ 20 with weight 0 linkdev LUB0 returned ACPI global int 20 ioapic0: int20 1a9a8 1000000 ohci0: interrupting at ioapic0 pin 20, event channel 3 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0 at pci0 dev 2 function 1: NVIDIA nForce MCP55 EHCI USB Controller (rev. 0xa2) LUB2: Picked IRQ 21 with weight 0 linkdev LUB2 returned ACPI global int 21 ioapic0: int21 1a9b0 1000000 ehci0: interrupting at ioapic0 pin 21, event channel 4 ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controller, 10 ports each: ohci0 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered viaide0 at pci0 dev 4 function 0 viaide0: NVIDIA MCP55 IDE Controller (rev. 0xa1) viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel using event channel 5 for irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel ignored (disabled) viaide1 at pci0 dev 5 function 0 viaide1: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3) viaide1: bus-master DMA support present viaide1: primary channel wired to native-PCI mode LSA0: Picked IRQ 22 with weight 0 linkdev LSA0 returned ACPI global int 22 ioapic0: int22 1a9b8 1000000 viaide1: using ioapic0 pin 22, event channel 6 for native-PCI interrupt atabus1 at viaide1 channel 0 viaide1: secondary channel wired to native-PCI mode atabus2 at viaide1 channel 1 viaide2 at pci0 dev 5 function 1 viaide2: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3) viaide2: bus-master DMA support present viaide2: primary channel wired to native-PCI mode LSA1: Picked IRQ 23 with weight 0 linkdev LSA1 returned ACPI global int 23 ioapic0: int23 1a9c0 1000000 viaide2: using ioapic0 pin 23, event channel 7 for native-PCI interrupt atabus3 at viaide2 channel 0 viaide2: secondary channel wired to native-PCI mode atabus4 at viaide2 channel 1 viaide3 at pci0 dev 5 function 2 viaide3: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3) viaide3: bus-master DMA support present viaide3: primary channel wired to native-PCI mode LSA2: Picked IRQ 20 with weight 1 linkdev LSA2 returned ACPI global int 20 viaide3: using ioapic0 pin 20, event channel 3 for native-PCI interrupt atabus5 at viaide3 channel 0 viaide3: secondary channel wired to native-PCI mode atabus6 at viaide3 channel 1 ppb0 at pci0 dev 6 function 0: NVIDIA nForce MCP55 PCI-PCI Bridge (rev. 0xa2) pci1 at ppb0 bus 1ppb0: added to list as bus 1 pci1: no spaces enabled! ppb1 at pci0 dev 10 function 0: NVIDIA product 0x0376 (rev. 0xa3) pci2 at ppb1 bus 2ppb1: added to list as bus 2 pci2: no spaces enabled! ppb2 at pci0 dev 11 function 0: NVIDIA product 0x0374 (rev. 0xa3) pci3 at ppb2 bus 3ppb2: added to list as bus 3 pci3: no spaces enabled! ppb3 at pci0 dev 12 function 0: NVIDIA product 0x0374 (rev. 0xa3) pci4 at ppb3 bus 4ppb3: added to list as bus 4 pci4: no spaces enabled! ppb4 at pci0 dev 13 function 0: NVIDIA product 0x0378 (rev. 0xa3) pci5 at ppb4 bus 5ppb4: added to list as bus 5 pci5: no spaces enabled! ppb5 at pci0 dev 14 function 0: NVIDIA product 0x0375 (rev. 0xa3) pci6 at ppb5 bus 6ppb5: added to list as bus 6 pci6: memory space enabled bge0 at pci6 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet LNEC: Picked IRQ 16 with weight 0 linkdev LNEC returned ACPI global int 16 ioapic0: int16 1a9c8 1000000 bge0: interrupting at ioapic0 pin 16, event channel 8 bge0: ASIC unknown BCM575x family (0x4201), Ethernet address 00:1c:c4:e3:74:20 bge0: setting short Tx thresholds brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb6 at pci0 dev 15 function 0: NVIDIA nForce MCP55 PCI-Express 16x Port (rev. 0xa3) pci7 at ppb6 bus 7ppb6: added to list as bus 7 pci7: i/o space, memory space enabled vga0 at pci7 dev 0 function 0: ATI Technologies product 0x7142 (rev. 0x00) vga0: WARNING: ignoring 64-bit BAR @ 0x10 vga0: WARNING: ignoring 64-bit BAR @ 0x18 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 wsdisplay0: screen 1-3 added (80x25, vt100 emulation) ATI Technologies product 0x7162 (miscellaneous display) at pci7 dev 0 function 1 not configured pchb0 at pci0 dev 24 function 0 pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00) pchb1 at pci0 dev 24 function 1 pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00) pchb2 at pci0 dev 24 function 2 pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00) pchb3 at pci0 dev 24 function 3 pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00) isa0 at pcib0 Link Device LSMB: Index IRQ Rtd Ref IRQs 0 255 N 1 20 21 22 23 polarity 1 trigger 0 Link Device LPMU: Index IRQ Rtd Ref IRQs 0 255 N 1 20 21 22 23 polarity 1 trigger 0 Link Device LUB0: Index IRQ Rtd Ref IRQs 0 20 Y 1 20 21 22 23 polarity 1 trigger 0 Link Device LUB2: Index IRQ Rtd Ref IRQs 0 21 Y 1 20 21 22 23 polarity 1 trigger 0 Link Device LSA0: Index IRQ Rtd Ref IRQs 0 22 Y 1 20 21 22 23 polarity 1 trigger 0 Link Device LSA1: Index IRQ Rtd Ref IRQs 0 23 Y 1 20 21 22 23 polarity 1 trigger 0 Link Device LSA2: Index IRQ Rtd Ref IRQs 0 20 Y 1 20 21 22 23 polarity 1 trigger 0 Link Device LNEB: Index IRQ Rtd Ref IRQs 0 255 N 8 16 17 18 19 polarity 1 trigger 0 Link Device LNEC: Index IRQ Rtd Ref IRQs 0 16 Y 8 16 17 18 19 polarity 1 trigger 0 Link Device LNED: Index IRQ Rtd Ref IRQs 0 255 N 8 16 17 18 19 polarity 1 trigger 0 Link Device LNEA: Index IRQ Rtd Ref IRQs 0 255 N 8 16 17 18 19 polarity 1 trigger 0 Link Device LNKB: Index IRQ Rtd Ref IRQs 0 255 N 2 16 17 18 19 polarity 1 trigger 0 Link Device LNKC: Index IRQ Rtd Ref IRQs 0 255 N 2 16 17 18 19 polarity 1 trigger 0 Link Device LNKD: Index IRQ Rtd Ref IRQs 0 255 N 2 16 17 18 19 polarity 1 trigger 0 Link Device LNKA: Index IRQ Rtd Ref IRQs 0 255 N 2 16 17 18 19 polarity 1 trigger 0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 Xen clock: using event channel 9 timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000 crypto: assign driver 0, flags 2 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 raidattach: Asked for 8 units Kernelized RAIDframe activated xenbus0: using event channel 10 atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) viaide1 port 0: device present, speed: 1.5Gb/s viaide1 port 1: device present, speed: 3.0Gb/s wd0 at atabus1 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) wd1 at atabus2 drive 0: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) ehci0: handing over full speed device on port 5 to ohci0 uhub1: port 5, device disappeared after reset Searching for RAID components... boot device: wd0 root on wd0a dumps on wd0b mountroot: trying lfs... mountroot: trying ffs... root file system type: ffs init: copying out path `/sbin/init' 11 uhidev0 at uhub0 port 5 configuration 1 interface 0 uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub0 port 5 configuration 1 interface 1 uhidev1: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1 ums0 at uhidev1: 8 buttons and Z dir. wsmouse0 at ums0 mux 0 wsdisplay0: screen 4 added (80x25, vt100 emulation)